Zeni SLS Free MAXI Lowsweat White is a high quality white melting soap paste for handmade soaps. Thanks to the lowsweat technology, the soap paste is more resistant to perspiration, i.e. the accumulation of moisture on the surface of the soap, making it ideal for humid environments, e-commerce production and extended storage.
The relatively slow solidification of the paste makes it an ideal choice for creating highly detailed soaps. The very strong adhesion of the layers (when sprayed with alcohol) allows the production of multi-layered design soaps. Soaps made from the soap paste should be packaged hermetically once finished to prevent evaporation of water and loss of weight.
The soap is SLS-free, which means it does not contain the strong detergent Sodium Lauryl Sulfate. The soap is gentler on the skin but still lathers well. The product does not contain any animal ingredients and has not been tested on animals.
Main features
- Intense white tone
- Lowsweat technology – reduces the build-up of moisture on the surface of the soap
- Very good transparency
- Suitable for humid climates
- Long solidification time to create detailed soaps
- Very strong layer adhesion
- SLS-free (for delicate skin)
- No animal ingredients
- Not tested on animals
IngredientsAqua, Sodium Stearate, Propylene Glycol, Sorbitol, Sucrose, Glycerine, Sodium Laurate, Sodium Laurethsulfate, Disodium Laureth Sulfosuccinate, Sodium Chloride, Titanium Dioxide, Stearic Acid, Lauric Acid, Tetrasodium EDTA.
How to make soap?
It’s easy to make soap from ready-made soap mix:
- Cut the mass into cubes (1-3 cm).
- Melt the cubes in a hot water bath at 65-70°C or in a microwave (approx. 400-500 W).
- Do not let the temperature exceed 75°C.
- Avoid boiling.
3. Add aromas and colours.
- Recommended amount of fragrance oils or essential oils: 10-20 g/kg.
- You can find the maximum amount of fragrance oil allowed under the relevant IFRA category of fragrance oil – always follow the limits set by IFRA.
- Add the colourant drop by drop until the desired result is achieved.
- Shea butter, cocoa butter, almond oil, coconut oil or olive oil can also be added to skin care products if desired. Usually not more than ~15 g/kg is recommended to prevent the soap from becoming too soft. Mix all the additives into the soap mixture and make sure that all the additives are well mixed into the soap mixture.
4. Pour into the mould and leave to set (about 20-40 min).
On average, 1 kg of soap paste can be used to make about 10 medium-sized soaps. Soap made from Lowsweat soap should be packed hermetically after removal from the mould to avoid evaporation of water and loss of weight.
